54 Tons Coal Based Pellet Activated Carbon to UAE

Good news to share with you! 54 tons of coal based pellet activated carbon is on the way to UAE by sea. The customer from UAE purchased pellet activated carbon for range hood filters. Pellet activated carbon has developed mesopores and large surface area, widely used for air purification and gas purification.

Pellet activated carbon has a very large number of microscopic pores, and these small pores are able to adsorb and capture tiny molecules, odors and impurities in the air. During the hood purification process, it can effectively adsorb grease, odors and other harmful substances produced during the cooking process.

The Customer requires that pellet activated carbon used for range hood filters be clean and dust-free.

On the one hand, too much dust can lead to second pollution. The function of the hood is to remove odors and harmful substances from the kitchen air. If the activated carbon contains too much ash and impurities, it may be released into the air during the purification process, resulting in re-contamination.
On the other hand, clean activated carbon can more effectively utilize its rich pores and surface area to adsorb harmful substances and odors in grease and smoke, thus improving filtration efficiency.

Huamei activated carbon factory is located in Ningxia, which is rich in raw material coal resources. We strictly follow the requirements for material selection and production process to ensure reliable product quality.

HME-AC™30 is a pellet activated carbon manufactured from selected grades of coal, which has developed pore structure, high specific surface area and low ash content, and the surface is clean and dust-free. After receiving the sample and testing, the customer was very satisfied with our pellet activated carbon and quickly placed an order for 54 tons of pellet activated carbon.

If you have requirements for pellet activated carbon for range hood filters, please fill out the form below and we will reply to you within 2 hours.