{"id":6780,"date":"2026-08-11T14:49:42","date_gmt":"2026-08-11T06:49:42","guid":{"rendered":"https:\/\/www.huameicarbon.com\/?p=6780"},"modified":"2026-08-11T14:49:42","modified_gmt":"2026-08-11T06:49:42","slug":"activated-carbon-phosphoric-acid-decolorization","status":"publish","type":"post","link":"https:\/\/www.huameicarbon.com\/ar\/activated-carbon-phosphoric-acid-decolorization\/","title":{"rendered":"Activated Carbon for Phosphoric Acid Decolorization: Specifications, Process, and Selection Guide"},"content":{"rendered":"

Phosphoric acid (H\u2083PO\u2084) produced by the wet process carries organic impurities that give it a yellow-to-brown color. Food-grade and technical-grade buyers won't accept it that way. Activated carbon adsorption is the standard method for removing these color bodies and bringing the acid up to specification.<\/p>\n

This guide covers the carbon specifications you need, how the decolorization process works, and what to watch for when selecting a supplier.<\/p>\n

Why Phosphoric Acid Needs Decolorization<\/h2>\n

Wet-process phosphoric acid \u2014 made by reacting phosphate rock with sulfuric acid \u2014 contains organic compounds extracted from the ore. These organics produce color (measured in Hazen or APHA units) and can affect downstream product quality.<\/p>\n

Applications that require decolorized phosphoric acid:<\/p>\n\n\n\n\n\n\n\n
End use<\/th>\nTypical color requirement<\/th>\n<\/tr>\n
Food-grade phosphoric acid (E338)<\/td>\n\u226420 APHA<\/td>\n<\/tr>\n
Electronic-grade<\/td>\n\u226410 APHA<\/td>\n<\/tr>\n
Technical-grade (fertilizer excluded)<\/td>\n\u226440 APHA<\/td>\n<\/tr>\n
\u0627\u0644\u0623\u062f\u0648\u064a\u0629<\/td>\n\u226415 APHA<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The color bodies are primarily high-molecular-weight organic compounds \u2014 humic substances, organic sulfur compounds, and condensation products. These molecules are large enough to be captured by mesopores in activated carbon, which is why methylene blue adsorption (a mesopore indicator) matters more than iodine number for this application.<\/p>\n

Recommended Carbon Specifications for Phosphoric Acid<\/h2>\n

Based on typical industry requirements and our supply experience:<\/p>\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nSpecification<\/th>\nWhy it matters<\/th>\n<\/tr>\n
Appearance<\/td>\nGranular black carbon<\/td>\nGranular form allows<\/p>\n

column operation and easier separation<\/td>\n<\/tr>\n

Raw material<\/td>\nCoal-based<\/a> (bituminous)<\/td>\nHigher mesopore ratio<\/p>\n

than coconut shell;<\/p>\n

better acid resistance<\/td>\n<\/tr>\n

Iodine number<\/td>\n\u2265950 mg\/g<\/td>\nIndicates overall<\/p>\n

adsorption capacity<\/td>\n<\/tr>\n

Methylene blue adsorption<\/td>\n~200 mg\/g<\/td>\nDirectly measures<\/p>\n

mesopore volume<\/p>\n

\u2014 the pores that trap color molecules<\/td>\n<\/tr>\n

Particle size<\/td>\n12\u00d740 mesh<\/td>\nBalances flow rate<\/p>\n

with contact surface area<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Why methylene blue matters here:<\/strong> Iodine number measures micropore volume (pores <2nm). But color bodies in phosphoric acid are large molecules \u2014 they need mesopores (2\u201350nm) to be adsorbed. Methylene blue has a molecular diameter of about 1.4nm and preferentially fills mesopores. A carbon with methylene blue ~200 mg\/g typically has sufficient mesopore development for effective acid decolorization.<\/p>\n

Why coal-based, not coconut shell:<\/strong> Coconut shell carbon<\/a> excels at micropore applications (water chlorine removal, \u0627\u0646\u062a\u0639\u0627\u0634 \u0627\u0644\u0630\u0647\u0628<\/a>). Coal-based carbon from bituminous coal naturally develops a broader pore distribution with more mesopores. It also tends to be more stable in concentrated acid environments over extended contact times. Additionally, coal-based carbon at this spec range is generally 20\u201330% less expensive per ton than equivalent coconut shell products.<\/p>\n

\"Huamei<\/h2>\n

Decolorization Process Overview<\/h2>\n

Two common configurations are used in industry:<\/p>\n

Batch (Stirred Tank) Method<\/h3>\n
    \n
  1. Dilute the phosphoric acid to working concentration (typically 40\u201354% P\u2082O\u2085)<\/li>\n
  2. Heat to 60\u201380\u00b0C (improves adsorption kinetics)<\/li>\n
  3. Add granular activated carbon at 0.5\u20132% w\/w of acid<\/li>\n
  4. Stir for 30\u201360 minutes<\/li>\n
  5. Filter to separate carbon from treated acid<\/li>\n
  6. Test color \u2014 repeat if needed<\/li>\n<\/ol>\n

    Typical dosage:<\/strong> 5\u201320 kg carbon per ton of phosphoric acid, depending on starting color and target specification.<\/p>\n

    Column (Fixed Bed) Method<\/h3>\n
      \n
    1. Pack activated carbon into a column (bed depth typically 1\u20132 meters)<\/li>\n
    2. Pass phosphoric acid through at controlled flow rate (1\u20133 BV\/hour)<\/li>\n
    3. Monitor outlet color<\/li>\n
    4. Replace or regenerate carbon when breakthrough occurs<\/li>\n<\/ol>\n

      Column advantage:<\/strong> More efficient carbon utilization (the entire bed saturates evenly). Commonly used in continuous production facilities processing >50 tons\/day of acid.<\/p>\n

      Contact time:<\/strong> Both methods typically require 20\u201360 minutes of effective contact. Shorter contact at higher temperatures, longer contact at ambient temperatures.<\/p>\n

      Key Process Variables<\/h2>\n\n\n\n\n\n\n\n\n
      Variable<\/th>\nEffect on decolorization<\/th>\nTypical range<\/th>\n<\/tr>\n
      Temperature<\/td>\nHigher temp \u2192 faster kinetics,<\/p>\n

      slightly lower equilibrium capacity<\/td>\n

      		60\u201380\u00b0C<\/td>\n<\/tr>\n
      Contact time<\/td>\nLonger \u2192 better removal<\/p>\n

      up to equilibrium<\/td>\n

      		30\u201360 min<\/td>\n<\/tr>\n
      Carbon dosage<\/td>\nMore carbon \u2192 more removal<\/p>\n

      (diminishing returns above 2%)<\/td>\n

      		0.5\u20132% w\/w<\/td>\n<\/tr>\n
      Acid concentration<\/td>\nVery high concentration<\/p>\n

      can reduce carbon performance<\/td>\n

      		40\u201354% P\u2082O\u2085<\/td>\n<\/tr>\n
      Particle size<\/td>\nFiner \u2192 faster kinetics<\/p>\n

      but higher pressure drop in columns<\/td>\n

      		12\u00d740 mesh is standard<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      Practical note:<\/strong> The relationship between dosage and color removal is not linear. Doubling the carbon rarely halves the residual color. Most plants run jar tests to find the economic optimum \u2014 the point where additional carbon gives diminishing improvement relative to cost.<\/p>\n

      Carbon Regeneration and Replacement<\/h2>\n

      Activated carbon used in phosphoric acid decolorization can often be thermally regenerated:<\/p>\n

        \n
      • Thermal regeneration:<\/strong> 700\u2013900\u00b0C in a rotary kiln or multiple hearth furnace. Recovers 85\u201395% of original capacity. Typically economic when using >20 tons of carbon per month.<\/li>\n
      • Replacement:<\/strong> For smaller operations, spent carbon is disposed of and replaced with fresh carbon. At 12\u00d740 mesh with hardness \u226590%, the carbon typically lasts 3\u20136 months in a fixed-bed system before breakthrough.<\/li>\n<\/ul>\n

        Regeneration loss:<\/strong> Expect 5\u201310% weight loss per regeneration cycle from attrition and burnoff. After 4\u20135 cycles, carbon usually needs full replacement.<\/p>\n

        Quality Control: What to Check When Receiving Carbon<\/h2>\n

        When evaluating activated carbon for your phosphoric acid process:<\/p>\n

          \n
        1. Methylene blue value<\/strong> \u2014 test this first. Below 180 mg\/g and you likely won't hit food-grade color targets.<\/li>\n
        2. Particle size distribution<\/strong> \u2014 sieve analysis to confirm 12\u00d740 mesh. Excess fines (>10% below 40 mesh) means carbon particles will pass through your filter and contaminate product.<\/li>\n
        3. Ash content<\/strong> \u2014 high ash can introduce unwanted minerals into your purified acid. Request COA data on heavy metal content if producing food-grade acid.<\/li>\n
        4. Jar test<\/strong> \u2014 take 500mL of your acid, add carbon at your standard dosage, stir at process temperature for process contact time, filter, measure color. This is the only test that actually predicts performance in your specific acid.<\/li>\n<\/ol>\n

          FAQ<\/h2>\n

          What type of activated carbon is best for phosphoric acid decolorization?<\/h3>\n

          Coal-based granular activated carbon (12\u00d740 mesh) with high methylene blue adsorption (~200 mg\/g) is commonly used for phosphoric acid decolorization. The coal-based material provides the mesopore structure needed to capture large color-body molecules. Iodine number should be \u2265950 mg\/g as a general quality indicator, though methylene blue is the more relevant performance predictor for this application.<\/p>\n

          How much activated carbon is needed per ton of phosphoric acid?<\/h3>\n

          Typical dosage ranges from 5 to 20 kg of activated carbon per ton of phosphoric acid, depending on the starting color, target color specification, and process configuration. Batch processes at higher temperatures (70\u201380\u00b0C) tend to use less carbon than ambient-temperature column systems. Jar testing with your specific acid is the most reliable way to determine optimum dosage.<\/p>\n

          Can activated carbon remove all impurities from phosphoric acid?<\/h3>\n

          Activated carbon primarily removes organic color bodies and some organic sulfur compounds. It does not effectively remove fluoride, heavy metals, or sulfate ions \u2014 those require other purification steps (solvent extraction, ion exchange, or crystallization). For food-grade production, carbon treatment is typically one step in a multi-stage purification process.<\/p>\n

          How often should activated carbon be replaced in a phosphoric acid column?<\/h3>\n

          In a fixed-bed column system, carbon typically operates for 3 to 6 months before breakthrough (outlet color exceeding specification). Actual lifespan depends on feed acid color, flow rate, and target specification. Monitor outlet color weekly and replace or regenerate when color approaches 80% of your target limit.<\/p>\n

          Is acid-washed activated carbon necessary for phosphoric acid decolorization?<\/h3>\n

          Not always necessary, since the acid environment effectively leaches soluble ash during operation. However, acid-washed carbon produces cleaner initial filtrate (no pH spike or mineral release in the first bed volumes), which can be important if you cannot discard the initial throughput. Standard water-washed carbon works fine for most phosphoric acid applications where the first few bed volumes can be recycled.<\/p>","protected":false},"excerpt":{"rendered":"

          Granular activated carbon is the standard method for removing organic color from wet-process phosphoric acid. This guide covers recommended specifications (12\u00d740 mesh, iodine \u2265950, MB ~200 mg\/g), batch and column process parameters, dosage guidelines, and quality control steps for food-grade and technical-grade acid production.<\/p>","protected":false},"author":2,"featured_media":6783,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"Activated Carbon for Phosphoric Acid Decolorization (Specs + Process)","_seopress_titles_desc":"How activated carbon removes color from phosphoric acid. Recommended specs: 12\u00d740 mesh, iodine 950+, methylene blue 200 mg\/g. Process steps and dosage guide.","_seopress_robots_index":"","footnotes":""},"categories":[1,25],"tags":[108,107,112,111,15,19,109,78,110],"class_list":["post-6780","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","category-knowledge","tag-decolorization","tag-phosphoric-acid","tag-12x40-mesh","tag-acid-purification","tag-activated-carbon","tag-coal-based-activated-carbon","tag-food-grade","tag-granular-activated-carbon","tag-methylene-blue"],"_links":{"self":[{"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/posts\/6780","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/comments?post=6780"}],"version-history":[{"count":0,"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/posts\/6780\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/media\/6783"}],"wp:attachment":[{"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/media?parent=6780"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/categories?post=6780"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.huameicarbon.com\/ar\/wp-json\/wp\/v2\/tags?post=6780"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}