
Activated carbon is used in natural gas processing at multiple stages — from wellhead gas cleanup to pipeline-quality polishing. Each stage targets different contaminants and requires different carbon specifications.
This guide covers the main gas treatment applications, the carbon types and specs for each, and how to specify carbon for your gas processing project.
Industrial gas treatment with activated carbon targets these contaminant groups:
| Contaminant | Sources | Why It Must Be Removed | Carbon's Role |
|---|---|---|---|
| H₂S | Natural gas,
biogas, syngas |
Toxic, corrosive,
poisons catalysts |
Catalytic oxidation
(impregnated carbon) or adsorption |
| Mercaptans
(R-SH) |
Natural gas, LPG | Odor, corrosion | Physical adsorption +
catalytic oxidation |
| Mercury
(Hg⁰) |
Natural gas
(0.01–5,000 µg/Nm³) |
Poisons aluminum
heat exchangers in LNG plants, environmental hazard |
Chemisorption on
sulfur-impregnated carbon |
| BTEX | Natural gas,
associated gas |
Contaminates glycol,
causes emissions |
Physical adsorption
in micropores |
| Siloxanes | Biogas,
landfill gas |
Forms abrasive SiO₂
deposits in engines |
Physical adsorption |
| COVs | Process vents,
tank emissions, fugitive sources |
Emissions compliance,
health hazard |
Adsorption with optional
thermal desorption |

Mercury in natural gas, even at trace levels (µg/Nm³), destroys the aluminum brazed heat exchangers used in LNG cryogenic processing. A single mercury excursion can cause liquid metal embrittlement that costs millions in repairs and months of downtime.
Sulfur-impregnated activated carbon is the standard mercury guard in LNG feed gas treatment. The sulfur reacts with elemental mercury to form mercuric sulfide (HgS), a stable and non-volatile compound trapped permanently in the carbon pores.
Especificações:
Mercury removal beds are non-regenerable — the carbon is replaced when capacity is exhausted. Bed life ranges from 3–10 years depending on inlet mercury levels.
For natural gas with H₂S levels below 1,000 ppm, impregnated activated carbon provides a simpler alternative to amine systems. This is common for small-to-medium gas fields, marginal wells, and gas gathering stations where installing an amine plant isn't economical.
For a comprehensive guide to H₂S removal with activated carbon — including biogas, natural gas, and refinery applications — see our detailed article on activated carbon for sulfur removal.
Key specs for gas sweetening:
Triethylene glycol (TEG) dehydration systems absorb BTEX along with water from natural gas. When the glycol is regenerated, BTEX is released — creating an emission source that may require control under environmental regulations.
An activated carbon bed on the glycol regeneration vent captures BTEX before it enters the atmosphere. The carbon can be thermally regenerated or replaced periodically.
Especificações:
Gas processing plants, compressor stations, and storage facilities produce VOC emissions from process vents, tank breathing losses, and fugitive sources. Activated carbon adsorption is the standard control technology when:
Fixed-bed carbon adsorbers with two beds in alternating adsorption/regeneration cycles are the standard configuration. The regenerated VOCs can be recovered as liquid or routed to a flare.
Especificações:
Biogas upgrading to biomethane (renewable natural gas) requires removal of H₂S, siloxanes, and VOCs before the gas enters membrane or PSA upgrading systems. Activated carbon handles all three contaminant groups, often in a multi-stage configuration:
For detailed biogas and landfill gas treatment specifications, see our sulfur removal guide.

| Aplicação | Target | Carbon Form | Impregnação | Key Spec | Bed Life |
|---|---|---|---|---|---|
| LNG mercury
guard |
Hg⁰ | Pellet
3–4 mm |
Sulfur
(10–15%) |
Hg capacity,
low pressure drop |
3–10 years |
| Natural gas
H₂S |
H₂S | Pellet
3–4 mm |
KOH or KI | H₂S cap ≥0.15 g/g | 6–18 months |
| Mercaptan
odor |
R-SH | Granular
4×10 |
NaOH or virgin | Iodine ≥900 | 12–24 months |
| BTEX from
glycol |
BTEX | Granular
4×10 |
None | CTC ≥50%,
SA ≥900 |
6–12 months
(regenerable) |
| VOC emission control | Mixed VOCs | Pellet
3–4 mm |
None | CTC ≥60%,
butane ≥25% |
3–5 years
(regenerable) |
| Biogas H₂S | H₂S + siloxanes | Pellet
3–4 mm |
KOH | CTC ≥60%, pH 9–11 | 6–12 months |
When sourcing carbon for gas treatment, provide your supplier with:
Huamei Carbon produces coal-based carvão ativado pellet for gas treatment applications, including H₂S removal, mercury guard beds, VOC control, and biogas upgrading. We offer virgin, KOH, KI, NaOH, and sulfur-impregnated grades in pellet diameters from 0.9 mm to 8 mm.
📱 WhatsApp: +86 181-3792-7803
📧 Email: sale@huameicarbon.com
🌐 Website: www.huameicarbon.com
Coal-based pellet activated carbon (3–4 mm diameter) is the standard for most gas purification applications. Pellet form provides low pressure drop and uniform gas distribution in fixed-bed vessels. For mercury removal, the carbon is impregnated with sulfur. For H₂S removal, KOH or KI impregnation is standard.
Yes. Sulfur-impregnated activated carbon (10–15% sulfur loading) is the standard mercury guard bed in LNG and gas processing plants. Mercury reacts with sulfur to form stable HgS trapped in the carbon pores. These beds typically last 3–10 years and achieve outlet levels below 0.01 µg/Nm³.
Iron sponge is cheaper per ton but has lower H₂S capacity per volume, creates pyrophoric waste, and can't handle mercaptans or other contaminants. Activated carbon — especially impregnated grades — has higher capacity, produces non-hazardous waste, and can be specified for multi-contaminant removal. For operations above 100 Nm³/hr, activated carbon typically has lower total cost of ownership.
It depends on the application and contaminant loading. Mercury guard beds: 3–10 years. H₂S removal (KOH-impregnated): 6–18 months. VOC adsorbers with regeneration: 3–5 years. Biogas H₂S: 6–12 months. Higher inlet concentrations and higher flow rates shorten bed life.
Pellet carbon is generally preferred for gas-phase applications because the uniform cylindrical shape provides more predictable pressure drop and better gas distribution than irregularly-shaped crushed granular carbon. Pellet carbon also generates less dust during loading and operation. Granular carbon is used where higher surface area per volume is needed, such as BTEX guard beds on glycol systems.