Huamei activated carbon company

Solvent Recovery

Activated carbon has a high absorption capacity and strength and is widely used for solvent recovery. The principle is to use its adsorption capacity to remove the solvent from the exhaust gas, which is then desorbed and recovered by means of heat or adsorbent. Solvent recycling saves costs, reduces wasted resources, and protects the health of the ecosystem.

Huamei Activated Carbon for Solvent Recovery

The HME-B and HME-C series of activated carbons are specially developed and produced for solvent recovery and are made from selected raw materials through a process of carbonization and activation. Through a special process, the activated carbon has well-developed mesoporous pores and excellent strength, as well as a high ignition point and good corrosion resistance. As a result, activated carbon has the advantage of rapid adsorption and desorption, ultra-low breakage rates, and long service life.

Features and Advantages

Well-developed Mesopores

Improve storage capacity and faster adsorption and desorption rates.

High Hardness

Reduce wear rate and increased service life

Large Surface Area

High absorption capacity for improved storage performance

Low Ash

Increase absorption efficiency of the activated carbon and prolong its life

Parameters of Activated Carbon for Solvent Recovery

HMEAC™600; HME-C™80
Notice: Activated carbon size can be customized according to your requirements.

Activated Carbon for Solvent Recovery Application Areas

Activated carbon has a wide range of applications in absorption, purification, and separation, and is used for solvent recovery in many industries. For example, the recycling of various organic substances such as esters, ethers, aromatic hydrocarbons, and alkanes from tape factories, the chemical industry, the automotive industry, the printing industry, the electronics industry, etc.
tape factory-application-solvent

Adhesive Tape

Solvents used to dissolve adhesive or coating materials for tapes need to be recycled, such as acetone, methanol, ethyl acetate, chloroform, dichloromethane, ethanol, etc.
printing factory-apllication-solvent

Printing Industry

There are various organic solvents used for dissolving inks, cleaning printing equipment, and cleaning printing plates, such as acetone, methanol, and ethyl acetate.
electronic manufacturing-apllication-solvent

Electronics Manufacturing

In the electronics manufacturing industry, the main substances to be recycled and reused are organic solvents such as acetone, methanol, ethyl acetate, chloroform, etc.
Automotive painting-application-solvent

Automotive Painting

The organic solvents used in the painting process include acetone, methanol, xylene etc. These solvents are used to thin and dissolve the paint to make it easier to apply during the spraying process.
The purpose of recycling these solvents is to reduce waste of resources and environmental pollution while reducing costs. The recovered solvents can be processed and reused to replace fresh solvents.

Quick Enquiry Form

If you want to know more, please fill out the form and contact us.
Contact us page form
thumbs-up linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram